zinc spray PRESTO 400ml

Corrosion protection for all ferrous metal components such as scooter frames, exhaust systems, engines, metal casings and so on. Particularly suitable for protecting weld joints and other corrosion prone parts. For colour-matched repair of galvanised surfaces use Presto-Zinc-Alu spray. Properties: high quality zinc coating with the dry film consisting of more than 90% zinc particles. Cathodic corrosion protection for all bare metals against strong corrosion causes. Heat resistant to 600°C. Specially formulated for weld joints. Ideal for all metals in external positions and particularly prone to corrosion. Chemical properties: base: epoxyester, colour: zinc-coloured, odour: solvent odour, glossiness: at 60 ° angle of measurement according to DIN 67530 matt: 5 gloss units, coverage: 400 ml gives approx. 1.0 - 1.5 m² depending on the texture and colour of the substrate. Drying times: (at 20 ° C, 50% relative humidity): touch dry after approx. 10 minutes, adhesion free after approx. 20 minutes, overpaintable after approx. 24 hours, temperature resistant after approx. 8-12 hours. The drying time depends on the ambient temperature, humidity and applied layer thickness. Temperature resistance: up to 600 ° C, shelf life / storage: 10 years in proper storage (= 10 ° - 25 ° C, relative humidity of max 60%). Container / contents: aerosol can, maximum nominal volume = 400ml. This item is only intended to be used by persons aged 18 or older. Hazard designation according to CLP regulation (EC) No. 1272/2008 and its adaptations: Hazard pictograms: GHS02 GHS07 GHS09 Signal word: Hazard. Labeled hazardous components: acetone, butanone. Hazard statements: H222-H229 Extremely flammable aerosol. Container is pressurized: May burst when heated. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H410 Very toxic to aquatic life with long lasting effects. Precautionary statements: P101 If medical advice is required, provide packaging or labeling label. P102 Keep out of the reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke. P211 Do not spray onto open flame or any other source of ignition. P251 Do not pierce or burn, even after use. P260 Do not breathe aerosol. P410 + P412 Protect from direct sunlight. Do not expose to temperatures above 50 ° C. P501 Dispose of contents / container in accordance with local regulations. Additional information: EUH066 Repeated exposure may cause skin dryness or cracking. Without sufficient ventilation, formation of explosive mixtures is possible. Relevant phrases: H220 Extremely flammable gas. H225 Highly flammable liquid and vapor. H226 Flammable liquid and vapor. H280 Contains gas under pressure; can explode upon heating. H304 May be fatal if swallowed and enters airways. H312 Harmful in contact with skin. H315 Causes skin irritation. H318 Causes serious eye damage. H319 Causes serious eye irritation. H332 Harmful by inhalation. H335 May cause respiratory irritation. H336 May cause drowsiness or dizziness. H400 Very toxic to aquatic organisms. H410 Very toxic to aquatic life with long lasting effects. H411 Toxic to aquatic organisms, long-term effects. R10 Flammable. R11 Highly flammable. R12 Highly flammable. R20 Harmful by inhalation. R20 / 21 Harmful by inhalation and in contact with skin. R 36 irritates the eyes. R37 Irritating to respiratory system. R38 Irritating to skin. R41 Risk of serious damage to eyes. R50 / 53 Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R51 / 53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R65 Harmful: may cause lung damage if swallowed. R66 Repeated exposure may cause skin dryness or cracking. R 67 Vapours may cause drowsiness and dizziness.