Peel-off lacquer DUPLI-COLOR Sprayplast transparent glossy 2x400ml

Quickly change the appearance of your vehicle with SRPAYPLAST peel-off paint. Give your scooter fairing, rims or other components an original look. If you decide you don`t like it, you can pull it off as easily as you put it on. Warning! Do not apply SPRAYPLAST to headlights, rear lights or other polycarbonate surfaces. We recommend applying at least 5 coats. The contents of this single can will suffice for up to 2 rims depending on size and design. Also available in sets of two cans. The set also contains an alternative nozzle for painting large panels and a pair of disposable gloves. Tip: the product can be painted over when dry, yet remains peelable. This makes it very suitable for custom paint jobs.

Specifics: high quality. Quick drying. Protective layer against stone impacts, scratches, dirt and moisture. Resistant to dilute acids, grease and oil. Very good opacity. Excellent adhesion on many materials such as metals, plastics (PP, PE, PVC) and glass. Not suitable for porous surfaces such as wood, concrete and stone. Self levelling giving a smooth surface. Suitable for both external and internal applications. Overcoatable and even then still peelable with DUPLI-COLOR, acrylic, nitrocellulose and synthetic resin spray-paints, water based paints, 2 pack paints, DUPLI-COLOR alkyton and emulsion paints. Do not apply to 1 pack paint, only suitable for application to the original vehicle paint or bare metal. Very resistant to standard cleaning products (eg rim cleaner). Carwash proof. Low electrical conductivity.

Chemical data: base: rubber-type polymer. Colour: clear. Odour: solvent odour. Glossiness: measured at 60° according to DIN 67530 glossy: 80-85 gloss units. Coverage: 400ml covers 0.2-0.3 square meters depending on colour and condition of underlying surface (5 coats). Drying time (20°C, 50% RH): touch dry in 10 minutes, gripable in 30 minutes and hard through in 2 hours. Drying time is dependent on prevailing conditions on the thickness of the coat applied. Temperature resistant up to 100°C. Shelf life: 10 years given sensible conditions (10-25°C, RH 60% max). Store frost free.

Packaging/ contents: aerosol can, maximum nominal volume 400ml. This item may only be sold to people over the age of 18. Hazardous substance labelling: classification of substance in accordance with EC directive no. 1272/2008: the product is classified and labelled in accordance with the CLP directive. Hazard pictogram: GHS02, GHS07. Signal word: Danger. Hazard warnings: H222-H229 highly inflammable aerosol. Vessel under pressure, can burst if heated. H319 causes severe eye irritation. H336 can cause drowsiness and dizziness. Safety warnings: P101 if medical advice is sought, be prepared to show packaging or identification label. P102 may not be used by children. P210 keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking. P211 do not spray into naked flames or other sources of ignition. P251 do not pierce or burn, even after can is empty. P260 avoid inhaling the aerosol. P410+P412 keep out of direct sunlight, do not expose to temperatures over 50°C. P501 dispose of the contents/ container according to the local requirements. Additional advice: Without adequate ventilation a build up of explosive gases is possible. Relevant sections: H220 highly inflammable gas, H225 liquid and vapour easily inflammable, H226 liquid and vapour inflammable. H280 contains gas under pressure; can explode during heating. H312 damaging to health through skin contact. H315 causes skin irritation. H319 causes serious eye irritation. H332 damaging to health if inhaled. H336 can cause drowsiness and dizziness. R10 inflammable. R11 easily inflammable. R12 extremely inflammable. R20/21 damaging to health if inhaled or comes into contact with skin. R36 irritates the eyes. R38 irritates the skin. R66 repeated contact can lead to skin damage. R67 vapours can cause dizziness and drowsiness. Please see UK safety standards for use of chemicals.

2x400ml