Battery charger jump starter GYS Startium 680E 12V/24V

STARTIUM 680E is a battery charger and jump starter. It can charge AGM/GEL (Stop/Start) and traditional batteries. The device also features a modern jump-start system. It can safely start modern vehicles equipped with numerous electrical (electronic) accessories. For 12 V and 24 V systems.
Technical information:

• Suitable for charging all common battery types. Choose between AGM, gel and universal charging modes. Use universal mode when the battery type is unknown. The system checks automatically
  
• Four different charging current outputs: 5 A, 15 A, 20 A and 40 A
• No need to monitor the process while charging—the device charges the battery to 100% (unlike many competing products, which stop at 85–90%)
• During charging, the charger continuously checks the battery condition and adjusts the charging mode accordingly. Charging progress and battery charge level are displayed in real time on the digital display
• The battery does not need to be removed from the vehicle for charging, and the battery terminals do not need to be disconnected. Safe for vehicle electronics. No sparks occur when connecting the charger clamps, as the device only supplies current after the clamps are connected and the battery condition has been analyzed
• The device can charge deeply discharged batteries down to 1 V
• Special timer for charging deeply discharged batteries
• SOS function. The charger can restore sulfated batteries
• The Automatic Start function allows you to start the vehicle safely. The system detects when the vehicle starter is engaged and then supplies the required current. No old-fashioned remote control is needed to start the vehicle
• The device automatically detects a heavily sulfated or defective battery. In this case, it will not start charging or jump-starting, protecting the vehicle's electronics
• The Auto Restart function resumes charging using the last selected settings
• The alternator testing (charging) function checks whether the vehicle's charging system is working properly by displaying the charging voltage
• Error codes are displayed to help identify problems quickly
• Jump-start cable length: 2.3 m
• For 12 V and 24 V systems
• For 12 V batteries: 20-675 Ah; for 24 V batteries: 20-525 Ah
• Charging current: 12 V 5-15-30 A (45 A boost) and 24 V 5-15-25 A (35 A boost)
• Jump-start current: 12 V 380-550 A and 24 V 270-380 A
• IP21