Turn signal PUIG Turn Light Mod. House Homol. C/Black 70x24mm, LED, black

Renew the front turn signals of your motorcycle with the new House lights from Puig. Approved indicators with clear LED glass (70x24mm) and black housing. Intermittent function. E-mark approval certification.
Model: Universal
Technical Info Turn Signals Connections:
Most bikes use bi-metallic relays. Their frequency (which sets the pace of the turn signals) depends on the amperage circulating through the circuit. When replacing OEM turn signals with aftermarket ones that have a different power rating, the amperage flowing through the circuit consequently changes, causing a change in the turn signal rhythm frequency. If the motorcycle uses an electronic relay (whose frequency works independently of the amperage circulating through the circuit), replacing OEM turn signals with aftermarket ones should not affect the turn signal rhythm frequency.
· Note: If you are unsure what type of relay the motorcycle uses, we recommend checking the turn signal rhythm after switching from OEM to aftermarket.
If OEM turn signals are replaced by aftermarket ones using incandescent bulbs, check that they use the same power. If it is different, replace the turn signal bulbs with others using the same power as the OEM ones. Our catalog includes bulbs with different power ratings.
If OEM turn signals are replaced by LED ones (with much less power than incandescent bulbs), there are two options to balance the rhythm frequency:
1. Incorporate one parallel resistor in the right circuit and another in the left circuit. If four turn signals are replaced, use resistor Part# 4298O. If only two turn signals are replaced (one on each side), use resistor Part# 4298O. The resistors are supplied with a diagram for parallel connection.
· Note: On most bikes, the hazard warning function is disabled when the resistor is used.
2. Identify the motorcycle's intermittent relay (location and number of pins) and replace it with the corresponding one from the supplied list. On most bikes, the hazard warning functions work correctly when the relay is replaced.
· Note: Some motorcycles on the market do not have an intermittent relay; obviously, it cannot be replaced in this case. Moreover, if more than one relay is involved in the blinking function, replacing only one relay may not solve the problem.
· Note 2: Some LED turn signals flash faster than normal when connected to power (it is normal to check the cable polarity with the flashing function activated). To verify the actual flashing frequency, remove all power by turning the key to the off position, then move it to the on position to activate the flashing function.