Indicator -MOTO NOSTRA handlebar end indicator LED (E-mark), 12 volt- Vespa V50, 50SS, 50SR, 50 Sprinter, 90SS, 90 Racer, PV125, ET3, Sprint150, Rally180/200 - colourless

The Moto Nostra LED handlebar end indicators with E-marking.
The Moto Nostra indicator combines the classic design of Hella handlebar end indicators with modern LED technology. The indicator has HighPower LED on a circuit board fitted on both sides. Compared to conventional bulbs, these emit a clear and brilliant light with almost no switch-on delay.

CONDITIONAL/ACCURRENT
The indicators are suitable for all 12Volt power sources, whether direct current (DC) or alternating current (AC)! A clever integrated control electronics allows the optional operation on both voltage types. Even at low voltage (e.g. when idling) they offer a constant flashing signal.

TEST MARK/TÜV
The flashers naturally have an E-mark on the flasher lenses, which are available in different colours. The E-mark means that the indicators can be used immediately in road traffic without TÜV approval.

USING
The indicators fit all vehicles on which handlebar end indicators have already been used ex works. Many Vespa vehicles built before 1980 can be retrofitted without problems. We offer corresponding sets for this purpose.

• TYPE: Handlebar end indicators Hella (originally used on V50, 90 Racer, ET3, Sprint, Rally)
• LIGHTING: LED (permanently integrated)
• VOLTAGE: 12V AC/DC
• WATTAGE: 3,6Watt (+ series resistor)
• CONTROL MARK: E-mark (E4)
• AVAILABLE COLOURS: Orange, Tinted or Clear

FAZIT
Useful update for every Oldie. Robust LED technology paired with classic original look result in a safety plus without this being visible from the outside!

TIP: The flashers use a series resistor for problem-free operation on the existing vehicle electrical system / flasher relay. This is necessary in order to sufficiently activate conventional (mechanical) flasher relays and to achieve an even timing. If you have optimized your vehicle electrical system or still want to do so, you can remove the series resistor (which is located outside the indicator housing in the supply line) when using an electronic flasher relay.

NOTE: The indicator lenses also fit on conventional flashers, but the approval mark is only valid when used with the Moto Nostra LED flasher.

Also available as 6 Volt version!

(US)