PTFE spray Presto universal lubricant transparent 400ml

Presto PTFE spray (universal lubricant) is a high quality, synthetic widely applicable lubricant with strong moisture repelling and rust prevention qualities. The high performance lubricant can be cleanly removed. Typical uses on mopeds or bicycles include chains, electrical cable, derailleur gears, rims, pedal shafts etc. Properties: hinders abrasion and seizing of treated parts. Very low coefficient of friction. High wicking ability. Excellent adhesion. Very good mechanical and thermal stability. Resistant to weak acids and bases. Silicon free. pH neutral. Corrosion protecting. Very fine structure (particle size approx. 5 microns). Weather resistant. Water repelling. Directional spray. This product is fitted with a special cap, containing both a spray head and a pipe, adaptable to suit the required use. Observe TRG300. Chemical data: base: mineral oil and PTFE (polytetrafluoroethylene). Colour: transparent white. Odour: characteristic. Density at 20°C: 0.88g/ml. Spray rate: 1.34 g/sec. Gas pressure at 20°C: 3-4 bar. 4 ball EP test (AS TM D 2596): 3430 N. 4 ball wear test (AS TM D 266): < 0.4mm. Temperature rating: -50 to 250°C. pH: neutral. Shelf life: 10 years in sensible conditions (10-25°C, RH 60% max). Packaging/ contents: aerosol can 400ml net volume. This item may only be sold to people over the age of 18. Dangerous Substances Directive in accordance with CLP-Regulation (EC) No. 1272/2008 and its various adaptations. Hazard pictograms: GHS02. Signal word: Danger. Hazard warnings: H222-H229 highly inflammable aerosol. Vessel under pressure, can burst if heated. H412 damaging for aquatic organisms with long lasting effect. Safety warnings: P102 may not be used by children. P210 keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking. P211 do not spray into naked flames or other sources of ignition. P251 do not pierce or burn, even after can is empty. P260 do not inhale aerosol. P410+P412 keep out of direct sunlight, do not expose to temperatures over 50°C. P501 dispose of the contents/ container according to the local requirements. Relevant sections: H220 highly inflammable gas, H225 liquid and vapour easily inflammable. H280 contains gas under pressure; can explode during heating. H304 can be deadly if ingested or breathed in. H336 can cause drowsiness and dizziness. H411 poisonous for aquatic organisms with long lasting effects. R11 easily inflammable. R12 extremely inflammable. R51/53 poisonous for aquatic organisms, can have long lasting effects in waters. R65 damaging to health, can cause lung damage if ingested. R66 repeated contact can lead to skin damage. R67 vapours can cause dizziness and drowsiness. Please see UK safety standards for use of chemicals.